| Customization: | Available |
|---|---|
| Temperature: | -29~200°c, -29~320°c |
| Certification: | CE, ISO9001, Ts |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The Pneumatic V port Ball Valve is a concentric segmental Ball Valve for regulating and cutting off applications. In order to achieve local control and remote centralized control, the valve can be controlled in the control room, does not need to run to the site or high altitude, and has dangerous manual control, saving human resources, time, and safety to a large extent.
The V port ball valve operated by Pneumatic Actuator with very fast rate(fastest open & close 2~3S), it is also normally called a pneumatic quick cut-off ball valve, and this kind of actuator has double-acting and single acting, also has accessories for optional, like SOV, L/S, POSITIONER, AFR, etc.
Features:
1. Single-piece body prevents leaks caused by separate flanges or locking rings.
2. Stem is finely grounded to match the actuator excellently, which prevents rocking motion and potential failure of the V-port segmented valve.
3. The upper and lower valve stems are fixed by self-lubricating bearings, which have high rotation precision and good rotation stability.
4. Designed with a specially shaped V-notch to allow the valve to have approximately equal percentage flow characteristics. At the same time, a large shear force will be generated between the segmented ball and the seat during the movement. It has excellent wiping performance and is especially suitable for applications with viscous media, fibers, and solid particles.
5. The valve seat is preloaded by a disc spring, so that the seat is always in close contact with the segmented ball, and the sealing performance is good, it can automatically compensate the sealing pair, ensuring reliable sealing.
6. Nitriding/Tungsten Carbide/Stellite Alloy/Nickle Base Alloy plating is available for abrasive media.
Structure:
| 1 | Bonnet | 8 | Sealing Ring |
| 2 | Gasket | 9 | V Port Ball |
| 3 | Body | 10 | Stem |
| 4 | Yoke | 11 | Up Guide Sleeve |
| 5 | Down Guide Sleeve | 12 | Packing |
| 6 | Down Aix | 13 | Packing Follower |
| 7 | Gland | 14 |
Specification:
| Nominal Diameter (mm) | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | ||
| Rated Flow Coefficient | 22 | 3 | 58 | 82 | 145 | 200 | 355 | 554 | 798 | 1418 | 2400 | 3900 | 6150 | 9800 | ||
| Nominal Pressure | PN16~PN64, CL150~CL300 | |||||||||||||||
| Flow Characteristic | Approximate Equal-Percentage | |||||||||||||||
| Travel | 90° | |||||||||||||||
| Air Pressure (MPa) | 0.4~0.6 | |||||||||||||||
| Accessories | Volume Boosters, Position Transmitters, Limit Switches, Solenoid Valves, Handwheels, etc. are optional | |||||||||||||||
*For important details such as size and weight, please feel free to contact the sales engineer.
Performance:
| Process Variability | Pneumatic Ball Valve |
| Intrinsic Error <(%) | ±2.5 |
| Hysteresis Error <(%) | 2.5 |
| Deadband <(%) | 2.0 |
| Start and End Position Deviation<(%) | ±2.0 |
| Rated Travel Deviation<(%) | +2.5 |
Q: Are you a manufacturer or a trading company?
A: We are a manufacturer located in Hangzhou City, Zhejiang Province, China.
Q: What brand of your company can supply?
A: JIANENG or OEM service.
Q: Do you accept customized orders?
A: YES! We can supply customized valves.
Q: Is there have MOQ?
A: No. we can accept 1 set, but there has an additional cost of $150.00(the process of export) if the order value is within $2000.00.
Q: What are your payment terms?
A: As per our company's policy, we normally have below 3 payment terms, we also can negotiate with both parties before confirming the order.
1) 100% T/T or West Union in advance that order value is within $ 2,000.00 USD.
2)30% T/T advance+70% balance before the shipment for the order value above $2,000.00USD.
3)L/C at sight for the order value above $ 50,000.00 USD.
Q: Can you give me a discount?
A: As you know, we are the manufacturer, so please trust us that our prices are competitive. If the quantity is large, we can consider giving you a discount.
Q: How about the delivery schedule?
A: Delivery schedule depends on product type. Therefore, please consult with the sales team for a specific delivery schedule when you inquire quote. The company is making an effort to keep the delivery schedule, which is the promise to the customer. The company will improve your satisfaction degree by delivering the necessary product as soon as possible.
Q: What is the valve warranty?
A: Our valve warranty period should be 18 months from the date of shipment or 12 months after installation, whichever occurs first.
Q: Do you have any valves in stock?
A: There have several series of valves in stock, and they can be delivered within two weeks. You can consult the sales staff for details.
){kind=link}